Version 2.0.9.5
Released: 04.06.2019
Type | Information |
---|---|
Info | No template changes |
Feature | Added hook "hook_before_create" |
Feature | Added option to reuse the same IP on re-creating a VPS. This option is not enabled by default and must be enabled manually. |
Improvement | Serveral general quality improvements in the code. Among other things, MySQL queries are now better cached |
Version 2.0.9.4
Released: 29.04.2019
Type | Information |
---|---|
Info | No template changes |
Improvement | Improve connection handling to the NOC-PS API. This results in a quicker page load time if NOC-PS is hosted in an other datacenter with a higher latency |
Improvement | The modules autofix functions to ensure the consistency between NOC-PS, WHMCS and the configurable options has been improved. Depending on the system, this can lead to a better overall performance |
Bugfix | In some cases, the IPMI virtual media tool did not worked if KVM was opened over the KVM proxy |
Version 2.0.9.3
Released: 28.12.2018
Type | Information |
---|---|
Info | No template changes |
Improvement | If servers with the installation profile "None" are deployed, WHMCS generates a random username and password in the product by default. This is now emptied |
Improvement | Better caching on the module admin page and other optimizations, which lead to faster loading times of the module admin page |
Bugfix | If the option "Show Port & Switch IP at admin product page" is activated and several devices are added to the server, it was possible that a port of another device was displayed instead of a switch port (eg the PDU port) |
Version 2.0.9.2
Released: 16.11.2018
Type | Information |
---|---|
Info | No template changes; Language file has been extended by the key $_LANG['dedic_bandwidthlimit_suspendreason'] |
Feature | Added option to display switch informations at admin product view (more informations) |
Feature | Added overrides for operating system logos (more informations) |
Feature | Added support for custom page templates (more informations) |
Feature | Added option to automatically take actions when server reaches bandwidth limit (more informations) |
Feature | Added option to automatically start a NOC-PS profile upon server termination (e.g. wipe disks) (more informations) |
Feature | Added support for choosing VPS location via configurable options (more informations) |
Feature | Added hook BandwidthOverusage (more informations) |
Version 2.0.9.1
Released: 23.09.2018
Type | Information |
---|---|
Info | No template changes |
Requirement | From now on ionCube 10 is required. |
Improvement | Improve stability on high latency NOC-PS installations |
Improvement | Ensure AJAX requests does not lock PHP sessions |
Improvement | Added new timeouts for power functions to prevent usage problems if NOC-PS or the server has problems / does not responde |
Bugfix | If a "display value" (for example, "Operating Systems | Choose OS") was used in the configurable option name, it was not possible to assign values on the "Server Management" page for configuring the automatic deployment of dedicated servers |
Version 2.0.9
Released: 07.08.2018
Type | Information |
---|---|
Info | This release contains no significant changes. It is primarily intended to be compatible with WHMCS v7.6. |
Feature | Add compatibility for WHMCS v7.6 (adjusted fa icons) |
Feature | Setting page: Added option "Interval for power status refresh at admin product page" |
Improvement | Stability improvements at the IPMI proxy server SSH connection |
Version 2.0.8
Released: 12.06.2018
Type | Information |
---|---|
Feature | IPMI / KVM Proxy for private IPs. More Informations. |
Feature | Admin clientproduct view: Show a link to IPMI |
Feature | Setting page: Added option "Update Server Password on Reinstallation" |
Feature | Setting page: Added option "Show Bandwidth Usage in GB instead of MB" |
Feature | Setting page: Add setting "None" to "Default Operating System" option |
Feature | If OS selection is available during ordering, you can now add the option "None" for no automated OS installation. Makes sense when clients want to install the OS over KVM. |
Feature | ACL Group Permissions: Added "Show IPMI Link" |
Bugfix | If the OS installation was started manually over NOC-PS, the installation process in the clientarea might was empty. |
Hook | Added: hook_after_open_ipmi |
Version 2.0.7
Released: 18.04.2018
Type | Information |
---|---|
Info | No template changes |
Feature | Added PHP 7.1 / PHP 7.2 compatibility |
Feature | Setting page: Added option to not log the execution of hooks |
Feature | IP Manager: Global IP search. With this search function all ip blocks can be searched at once. |
Improvement | If NOC-PS server is not added correctly, show a better description of the issue at the module admin page |
Bugfix | Clientarea: Outbound live traffic value was sometimes not accurate |
Bugfix | WHMCS Server Page: If the NOC PS address is not defined, the "Test Connection" function returns falsely success. Fixed |
Version 2.0.6
Released: 24.02.2018
Type | Information |
---|---|
Feature | VPS: The default ACL group can now be overriden by the WHMCS product configuration. Read more |
Feature | Module Settings: Subnets can now be blacklisted from the IP Manager. This can be used to hide private subnets. |
Feature | IP Manager: The default amount of displayed IPs can now be changed via dropdown. |
Feature | IP Manager: Added mass reserve / unreserve via checkbox |
Feature | IPv6 support. Read more |
Bugfix | Admin Clientproduct page: Under certain circumstances the pre-selected ACL dropdown value was incorrect. Concerned only vps products. |
Bugfix | If "Keep NOC-PS Hostname" setting is enabled, ensure that the hostname does not get modified by auto provisioning. |
Version 2.0.5
Released: 16.02.2018
Type | Information |
---|---|
Feature | Admin Clientproduct page: Refresh power status without site reload using AJAX |
Feature | Admin Clientproduct page: Show NOC-PS server description |
Feature | Admin Clientproduct page: Edit NOC-PS server description |
Feature | Added ISO Manager which allows servers to be booted from an ISO file. Read more |
Feature | Clients can boot from ISO and access server via VNC. Works for VPS and dedicated servers |
Feature | Module settings: Blacklist additional operating systems for virtual servers (e.g. oVirt, VMware) |
Hook | Added: hook_after_isoboot |
Hook | Added: hook_pre_open_clientarea |
Improvement | Better error handling if the NOC-PS backend is unreachable |
Version 2.0.4
Released: 06.02.2018
Type | Information |
---|---|
Info | This release contains many changes. Only relevant features and improvements are listed |
Feature | New Clientarea template is available. At the module configuration you can switch between the old and new template |
Feature | ACL Groups can now be also setted directly at the admin client product page |
Feature | Full VPS support |
Feature | VPS Autoprovisioning |
Feature | IP Manager to manage IP assignments |
Improvement | Show message on the module admin page if a new version is available |
Improvement | At admin client product page all network port graphs are shown now. Before, only the first port was shown |
Improvement | Reinstallation and recovery boot is now seperated. Admin can select a list of chooseable recovery OS at module configuration |
Improvement | At reinstallation menu the client can use the NOC-PS installation addons. Access to this feature can be limited using the ACL Group Manager |
Version 2.0.3
Released: 04.12.2017
Type | Information |
---|---|
Info | No template changes |
Improvement | Extend the check of available sensors via IPMI and ensure that sensor graphs are visible in client area if sensors exists |
Bugfix | 'Traffic graph "Current Month" to billing cycle graph' option sometimes didn't showed a monthly traffic graph if the next due date was modified. Additional checks has been added to ensure the graph generation |
Version 2.0.2
Released: 06.11.2017
Type | Information |
---|---|
Info | No template changes |
Improvement | Improve handling of the BMC Reset feature. Show button at admin & client area only if IPMI is available |
Feature | Added a setting on the setting page to not show hidden products at the "Server Management" tab |
Feature | Added a setting to allow automated update of the WHMCS hostname field if operating system gets installed with a different hostname |
Bugfix | Bandwidth limit has not been applied if the bandwidth limit has been choosed by an configurable option group using a display value (e.g. "20 TB|20 Terabyte" instead of "20 TB") |
Version 2.0.1
Released: 17.10.2017
Type | Information |
---|---|
Bugfix | If WHMCS admin username 'admin' does not exist, noc-ps module admin page fails to load |
Version 2.0.0
Released: 13.10.2017
Type | Information |
---|---|
Info | This release contains many changes. Only relevant features and improvements are listed |
Feature | Add BMC Reset at Client area and Admin area |
Feature | Bandwidth Accounting and Bandwidth Billing |
Feature | Automated Server Provisioning |
Feature | Added Hook System to execute own code on events |
Feature | Automated Server start / stop on suspend, unsuspend, terminate |
Feature | ACL Groups to manage permissions |
Feature | Setting Page to control the behavior of the software |
Feature | Module Activity Log to keep track of actions |
Feature | Functions to manipulate available operating systems per service |
Feature | Added Language Override Files |
Bugfix | Client area: don't show 'Cancel Installation' button if the installation is already completed |
Improvement | Admin area: don't show empty traffic graphs. Instead show a message |
Improvement | Added file to add valid strings for online / offline detection (like 'chassis power offline', 'offline'). Useful for PDUs, because PDUs returns often other strings than just 'Online' |
Version 1.0.3
Released: 01.08.2017
Type | Information |
---|---|
Info | No template changes |
Feature | Add 'Test Connection' Button at WHMCS Server Configuration Page |
Improvement | Improve handling of KVM Console Links at WHMCS Admin Area |
Improvement | Reduce page load time at Admin Area |
Version 1.0.2
Released: 29.07.2017
Type | Information |
---|---|
Info | No template changes |
Improvement | Reduce page load time at client area |
Bugfix | Irritating error message at WHMCS admin backend was shown if the server was not found at NOC-PS |
Version 1.0.1
Released: 21.07.2017
Type | Information |
---|---|
Bugfix | Shutdown Button at admin didn't work under some circumstances |
Bugfix | Don't show invalid sensor values received by IPMI |
Version 2.2.0
Released: 12.06.2019
New documentation pages:
Updated documentation pages:
Version 2.1.0
Released: 13.12.2019
This prevents servers that have just been terminated from being delivered before the NOC-PS wipe profile is completed.
Version 2.0.9.6
Released: 16.09.2019
No template changes
IPMI Proxy Update
To update your IPMI proxy, just press the "Redeploy" button at the module admin page.
The configuration of the private IPs is retained. If manual changes have been made to the proxy (which should not be the case in general), they may be overwritten.
Released: 04.06.2019
No template changes
Released: 29.04.2019
In some cases, the IPMI virtual media tool did not worked if KVM was opened over the KVM proxy
Version 2.0.9.3
Released: 28.12.2018
Version 2.0.9.2
Released: 16.11.2018
Added option to automatically take actions when server reaches bandwidth limit (more informations)
Version 2.0.9.1
Released: 23.09.2018
If a "display value" (for example, "Operating Systems | Choose OS") was used in the configurable option name, it was not possible to assign values on the "Server Management" page for configuring the automatic deployment of dedicated servers
Version 2.0.9
Released: 07.08.2018
Version 2.0.8
Released: 12.06.2018
Added: hook_after_open_ipmi
Version 2.0.7
Released: 18.04.2018
If NOC-PS server is not added correctly, show a better description of the issue at the module admin page
Clientarea: Outbound live traffic value was sometimes not accurate
Version 2.0.6
Released: 24.02.2018
Module Settings: Subnets can now be blacklisted from the IP Manager. This can be used to hide private subnets.
IP Manager: The default amount of displayed IPs can now be changed via dropdown.
Version 2.0.5
Released: 16.02.2018
Added: hook_after_isoboot
Version 2.0.4
Released: 06.02.2018
Version 2.0.3
Released: 04.12.2017
Version 2.0.2
Released: 06.11.2017
Version 2.0.1
Released: 17.10.2017
Version 2.0.0
Released: 13.10.2017
Version 1.0.3
Released: 01.08.2017
Reduce page load time at Admin Area
Released: 29.07.2017
Version 1.0.1
Released: 21.07.2017